Ny sida 2

Fencing systems

I. fencing gates and wickets - a

I. fencing gates and wickets - b

II. fencing segments and posts

II. fencing segments - filling catolologue

Fencing systems

I. Driveway fence gates and wickets

q LIST OF QUESTIONS to let you order properly fencing doors and wicket doors

Type (sliding: FOR PRIVATE HOUSES, EKO, INDUSTRIAL, DOUBLE-LEAF gate, WICKET - to be determined after having read the contents of the chapter)?
What is the driveway (mounting opening) width in which gate or wicket is to be assembled?
How high is the gate or wicket leaf?
What is the direction of opening the gate or wicket?
What kind of paling do you want?
What kind of corrosion protection do you want?
Do you want a manual or automatic gate (additional transmitters)?
Optional equipment?

Types of HANDLOPOL AB fencing gates

WISNIOWSKI company offers:

sliding fencing gates: for private houses, Eko, industrial,
double leaf fencing gates,
wickets.

Give the type of the gate ordered in the table.

Determining gate and wicket ordering dimensions

Basic data to be determined while placing an order for sliding gates (see fig. 1- 5):

gate driveway width,
gate height (in the case of a gate without paling give the height of the construction and additionally the height of planned paling acc. to figure from pages 4^J - 5^J).

For private houses sliding gate maximum dimensions are 6000 x 1950 [mm] (driveway width x gate height). Typical dimensions: 3500 x 1450 [mm] (driveway width x gate height).

Its structure is made of steel sections (guiding section is made of half-closed section 80 x 80 [mm]).

Textruta: Fig. 1
Sliding gate - for private houses with AWso 93-02drive unit - above 5000 [mm] of driveway width, right, the premises view.

Textruta: Fig. 2
Sliding gate - for private houses with AWso 2000 drive unit in the post - (standard equipment: signalling lamp, outer antenna) right premises view

Textruta: Fig. 3
Sliding gate - for private houses manually opened, up to 5000 [mm] of driveway width, additionally equipped with the drive unit AWso 93-01, right, premises view

Eko sliding gate maximum dimensions are 3800 x 1450 [mm] (driveway width x gate height). Typical dimensions: 3500 x 1250 [mm] (driveway width x gate height).

Its structure is made of steel sections (guiding section is made of half-closed section 50 x 55 [mm]).

Textruta: Fig. 4
Sliding gate - for private houses - Eko manually opened, right, premises view

Textruta: Fig. 5
Sliding gate - for private houses automatically opened, with the drive unit AWso 2000, in the post, right, premises view

ATTENTION ! Total door length = driveway width + distance between bolts + 400 [mm]

Textruta: gates post Post height = height of planned paling + 10 cm (ordering dimension)

Textruta: Distance between bolts (anchors) determined when ordering Textruta: gates post Post height = height of planned paling + 10 cm (ordering dimension)

Textruta: SLIDING GATE (left) - mounting instructions dimensions are given in [mm] Textruta: Control wires for photocell YLY 2x0,5 Textruta: Line of fence system Textruta: Mounting reserve about 1000(2) Textruta: M 16 or M 20(in dependence on the gate size) Textruta: B – prepared for AWso 93-01 drive unit Textruta: Distance between foundation bolts (anchors) determined when ordering Textruta: Foundation for left sliding gate Textruta: (1) Supply wires with the distance from the supply source £ 30 [m] YLY 2x1,5, and with the bigger distance YLY 2x2,5
(2) For automatic gates mounting reserve 1000, for manual gates with the drive unit AW to be assembled later on mounting reserve is 2000
ATTENTION ! Do not change intersections of supply wires and control wires it world cause mounting difficulties. Textruta: Radiation barrier (optional equipment)

Textruta: SLIDING GATE (right) - mounting instructions dimensions are given in [mm]

Textruta: Distance between foundation bolts (anchors) determined when ordering Textruta: Foundation for right sliding gate Textruta: Place of supply, control wires insert, and for photocells mounting reserve 1000(2) Textruta: (1) Supply wires with the distance from the supply source £ 30 [m] YLY 2x1,5, and with the bigger distance YLY 2x2,5
(2) For automatic gates mounting reserve 1000, for manual gates with the drive unit AW to be assembled later on mounting reserve is 2000
ATTENTION ! Do not change intersections of supply wires and control wires it world cause mounting difficulties. Textruta: Line of gate track Textruta: Radiation barrier (optional equipment)

Textruta: SLIDING INDUSTRIAL GATE (left) - mounting instructions dimensions are given in [mm] Textruta: min. 1000 but below the freeze zone acc. to PN-81/B-03020

Textruta: Control wires for photocell YLY 2x0,5 in steel or PCV pipe Textruta: YLY 3x1,5 power supply Textruta: Mountig reserve 1000 Textruta: Foundation bolts (anchor) of reinforced concrete bar 25-18G2 PN-82/H-95215 lenght 500

Textruta: min. 1000 but below the freeze zone acc. to PN-81/B-03020

Textruta: Foundation bolt s(anchor) of reinforced concrete bar 25-18G2 PN-82/H-95215 lenght 500

Textruta: SLIDING INDUSTRIAL GATE (left) - mounting instructions dimensions are given in [mm] Textruta: min. 1000 but below the freeze zone acc. to PN-81/B-03020 Textruta: Control wires for photocell YLY 2x0,5 in steel or PCV pipe Textruta: Foundation bolt (anchor) Textruta: Place o wirs inserting Textruta: YLY 2x0,5 control with button Textruta: Mountig reserve 1000 Textruta: Foundation bolts (anchor) of reinforced concrete bar 25-18G2 PN-82/H-95215
lenght 500 Textruta: Finished driveway level

Fencing systems

I. fencing gates and wickets - a

I. fencing gates and wickets - b

II. fencing segments and posts

II. fencing segments - filling catolologue

Colours according to RAL palette

Driveway fence gatees and wickets A

Driveway fence gatees and wickets B

Fencing segments and posts

Fencing segments - filling

NEWS - fencing segments filling and posts

ROLLER BLINDS

RAL colours map

ALUMINIUM JOINERY

PRICE LIST - garage doors - pdf

LEVERANSVILLKOR

Contens English

Contact Information

HANDLOPOL SVENSKA AB

Telephone: +46 (0) 31 336 35 53; +46 (0) 708 10 11 91
FAX: +46 (0) 31 336 35 01
Postal adress: HANDLOPOL AB; Gamla kronv. 10; S-433 33 Partille (Göteborg); SWEDEN
e- mail: info@handlopol.se

General Information: Handlopol AB

http://www.handlopol.se/garageportar

© 1991-2004. Dessa sidor tillhör Handlopol Svenska AB.
Eftertryck/kopiering medges om tillstånd inhämtats hos
Handlopol Svenska AB och vid publicering skall källan tydligt anges.

Fencing systems

Contact Information

© 1991-2004. Dessa sidor tillhör Handlopol Svenska AB. Eftertryck/kopiering medges om tillstånd inhämtats hos Handlopol Svenska AB och vid publicering skall källan tydligt anges.

Skicka e-post till info@handlopol.se med frågor eller kommentarer om den här webbplatsen. Copyright © 1991 HANDLOPOL SVENSKA AB Senast ändrad: 11 september 2004

© 1991-2004. Dessa sidor tillhör Handlopol Svenska AB.
Eftertryck/kopiering medges om tillstånd inhämtats hos
Handlopol Svenska AB och vid publicering skall källan tydligt anges.

Skicka e-post till info@handlopol.se med frågor eller kommentarer om den här webbplatsen.
Copyright © 1991 HANDLOPOL SVENSKA AB
Senast ändrad: 11 september 2004