|
EuroPro garage sectional door
EuroPro sectional door have the Technical Approval ITB No. AT-06-0418/2001
EuroPro garage sectional door q LIST OF QUESTIONS to let you order properly an EuroPro door
EuroPro sectional doors are made in standard dimensions from series of types given in the following table. EuroPro door in standard execution is the door: operated manually, in colour RAL 9016 (outer side), with panels without glazing, equipped with a lock with an insert situated on the right side of the door (looking from garage indoors), adjusted to install an electric drive. To order the door, it is sufficient to give the opening height and width from the dimensional series of types. Optionally HANDLOPOL company may select the door for the opening. In such a case, an order form should be filled according to this directory book. In the event of giving the opening dimensions only, HANDLOPOL company is not liable for the wrong selection of the door. Any departures from dimensions and data following are possible only after the prior agreement with HANDLOPOL company. On the order form columns which are marked “not applicable" in this directory have to be left blank. Door type HANDLOPOL company offers standard EuroPro sectional doors for openings included in the following dimensional series of types. As a standard doors are available in four basic dimensions (applays only for sectional doors with horizontal overpress, for other sizes in shaded boxes with caissons filling available only on request), the remaining ones are available only on request. As issues from the following table, the recommended minimum doorhead for EuroPro door fixing is:
Table No 1
Taking into
account the door construction, it is possible to fix it into the opening
with the smaller doorhead, and even with no doorhead at all assuming that
the total height of the garage meets the requirements given in the table No
1. In such This heat insulation should be made by the clients in their own capacity. Depending on the way of drive minimum mounting depth (required minimum garage depth) is:
If the client does not have the required 3400 mm depth, on request it is possible to adapt the drive unit to the existing conditions, with the minimum garage depths:
In order to fix the EuroPro door a free space is required on both sides of the opening according to the following drawing. EuroPro door may be fixed into an opening 30 mm wider on each side than that given in the series of types, but in such a case it is necessary to provide the heat insulation of the door side frame by the clients in their own capacity.
EuroPro doors may be fixed into an opening with the dimensions smaller than those given in the series of types provided there is a sufficient side space and a overhead. In the event of fixing the door into the opening narrower than the dimension from the series of types, there will be left recesses about 20 mm wide on the sides of the door that should be masked by the clients in their own capacity. When necessary, it is possible to narrow the door, but not more than for one value from the dimensional series of types.
Is there an additional entrance The factor deciding about the way of driving the door may be the presence of an additional entrance to the garage. State "yes" or "no" on the order form in the column "is there an additional entrance". Wall Depending on the execution, sectional door may be fixed to the walls made of reinforced concrete (B), brick walls (C) or walls made of steel frames (S). In the order give the exact data of wall execution as well as the wall thickness. The room dedicated to the mounting has to be completely finished (walls plastered, floor finished), the walls cannot have the traces of defects of execution. The room has to be dry and free from chemicals harmful for paint coats. Glazed panels EuroPro sectional door on request may be fitted with small windows with a double acrylic panel. Dimensions of glazing in the clearance: 602x132 [mm]. Glazing cannot be fitted in the two lowest panels. Maximum number of glazings:
State the number of panels to be glazed and the number of windows in one panel in the order. Colour EueoPro sectional door as a standard are made of panels with white outer side RAL 9016 while the colour of inner side is close to RAL 9002. Optionally, on request panels may be painted in any "colour" from the RAL palette (eggshell gloss surface). State the colour of panels from the outside "Z" and from the inside "W" (room indoors). Way of opening and electric drive As a standard the door is equipped with a lock with an insert fitted on the right side looking from the garage indoors. No availability of changing the lock location. Depending on the requirements we offer a few ways of driving the door:
AW drive unit as a standard is equipped with a remote control with two transmitters. You may order additional transmitters for the AW drive unit - give appropriate information in the order form. Optionally, on request the door may be equipped with photocells, protecting from its closing when there is an obstacle in its clearance. In the event of ordering photocells, write "yes" on the order form in the column "remote control + photocells". Place your additional requirements regarding the door execution in the order form in the column "NOTES". Colours according to RAL palette
BTX 3016 RAL 5010 RAL 5012 coral red dark blue blue
RAL 6029 RAL 7016 RAL 7040 mint green anthracite grey grey
RAL 8011 RAL 8014 RAL 8019 light brown medium brown dark brown
RAL 9002 RAL 9010 RAL 9016 grey-white white white (matt)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
