|
Double - leaf doors hinged single doors Steel dors hinged single doors Suspended sliding doors garage and industrial
Overhead garage doorshinged single doors
Structure of
the leaf is made of galvanised steel sections the frame is made
Double leaf
hinged garage doors may be provided with heat insulation (foamed
Steel dors
hinged single doors
Suspended sliding doors garage and industrial Orders should be placed using HANDLOPOL AB ordering for MakroPro sectional industrial doors. Structure of the leaf is made of galvanised steel sections, guiding rail is made of steel section, phosphate and primer coated. Filling: (as in KOMFORT doors):
Suspended sliding doors with filling of trapezium metal sheet T-10, T-18 is accessible in version with entrance wicket in the door leaf, similar as in overhead garage door, fig. page 6B. In standard, wicket is open into the outside of the room. Standard execution: manually operated door, leaf division - symmetrical, seal: side - gaskets of fine PCV, bottom brush gaskets, upper forming gaskets. For uneguivocal specification of the order that will make the execution and mounting of the door easier, client should always specify:
Determination of the mounting dimensions for suspended sliding door:
S – width of the door; H – height of the door; * for doors with area up to 7,0 m2 – N = 200 Suspended single leaf door may be executed as:
The opening direction is determined when looking at the door from the plating side. Suspended door can be built:
Fig. 3 Suspended sliding doors, A) single leaf; B) double - leaf, view from outside detail - c) way of fixing the door at the top - d) way of guiding at the bottom
Technical informationreferring to the determination in notes one leaf, two leaf doors execution Right leaf* - leaf that from the view from the hinges, from right side, and after fixing in the doorframe or directly in the opening, its turn is clockwise while closing. Left leaf* - leaf that from the view from the hinges from left side, and after fixing in the doorframe or directly in the opening, its turn while closing is anticlockwise. Bipartite pulled apart, right door* - doors which first opend leaf is right leaf. Bipartite pulled apart, left door* - door which first opend leaf is left. Additionally regarding the need of settlement on which side plating is to be mounted - in ordering forms client should determine if plating is to be mounted from the hinges side or opposite side of the leaf. This information should be placed in NOTES. *) - Definitions given according to standard PN-B-91000 Building joinery. Doors and windows. Terminology.
Colours according to RAL palette
|
||||||||||||||||||||||||||||||
