|
Aluminum joinery
Aluminum joinery
q
LIST OF
QUESTIONS to let you order properly aluminum joinery
-
What type of
sections to use to make the joinery which is being ordered (with or
without heat barrier) and in which
system?
-
What colour
acc. to RAL?
-
What kind of
filling?
-
What kind of
ferrules?
-
What opening
direction?
-
What are the
dimensions of the product which is being ordered to be?
Type of
sections
-
METALPLAST
DBPT 60 - doors and windows, WICONA WICLINE 50 EN - windows / WICSTYLE 50
EN - doors, WICSLIDE 24EN - sliding doors and windows GEZE automatic
doors.
-
from sections
with heat barrier in systems: METALPLAST SP 60 - windows and doors, WICONA
WICLINE 50 E - windows/WICSTYLE 50E - doors, WICSLIDE 24E - sliding doors
and windows, WICTEC 50 - shild walls.
We make
aluminum joinery in systems used by us in the following standard colours
from the RAL palette:
-
brown: 8014,
8016, 8017, 8019,
-
blue: 5010,
-
white:
9010, 9016,
-
red: 3000
-
green: 6016,
-
grey: 7035,
and for
additional charge in any other colour from the RAL palette or not included
in the RAL palette as well as in synthatec plus paints (25 years warranty).
Give the number of colour acc. to the RAL palette and synthatec plus palette
in the box.
In aluminum
joinery it is possible to use the following kinds of fillings:
-
single glass
-
loat 4 or 5
[mm] thick,
-
stained
glass in bulk (antisol) in colours: brown, graphite, green, blue,
-
reflex
glass in colours: brown, graphite, green, blue,
-
safety
glass 6.4 [mm],
-
milk safety
glass 6.4 [mm],
-
antiburglary glass: P2 - 8.8 [mm], P3 - 9.5 [mm], P4 - 12.5 [mm],
-
ornamental
frosted glass,
-
sand glass.
-
integrated
window panels:
-
standard
window panels:
-
DBPT 60
system - one-chamber widow panel integrated of FLOAT 4/14/FLOAT4 window
panels, U = 2.9
-
SP 60 and
WICONA system - one-chamber window panel integrated of FLOAT
4/16/THERMOFLOAT4, U = 1.1
-
for
additional charge there is a possibility to order any window panel
available on the Polish market.
ATTENTION !
In DBPT 60 system you can use:
-
single
window panel 4 to 6.4 [mm]
-
laminated
panel in a 22 [mm] packet
-
Panel:
-
without
heat insulation: 2 x metal sheet coated with powder paint,
-
with heat
insulation: 2 x metal sheet coated with powder paint + foamed
polystyrene.
Give the type
of filling putting down type of window panel and crossing out appropriate
panel in the corresponding box.
What handles
may be used:
When ordering
aluminum joinery give the opening direction by choosing the appropriate
option in the joinery description or by marking on the drawing following the
examples given below:
Aluminum joinery dimensioning
While making a
drawing, mark a view from outside or from inside.
Drawing should
be precisely dimensioned in [mm] and give:
-
joinery outer
dimensions (width x height),
-
In
the case of double-leaf doors, give their division or the clearance of the
active leaf, adding at the dimensional line for example: “clearance 900",
-
position
of posts, crosspieces giving dimension to the axis or to the edge,
-
in
the drawing cross-hatch part of joinery filled with panel,
-
if
you do not mark opening direction in the description, mark it in the
drawing (the way of marking opening direction is shown in the example).
Colours
according to RAL palette
|