|

BR-77w
roller doors 
drawn under the ceiling
BR 77-s-bs roller
doors have
the Technical
Approval ITB No. AT-15-4373/2000
BR-77w
roller doors drawn under the ceiling
q
LIST OF
QUESTIONS to let you order properly a BR-77w roller doors drawn under the
ceiling
-
What is the
opening inner width (SO =)?
-
What is the
opening inner height (HO = )?
-
How high is
the doorhead (N =)?
-
What are the
distances between the opening and side walls - (W1 = ;W2
=)?
-
What is the
garage depth (free space under the ceiling) (E =)?
-
Is a full
driveway height required?
-
What colour
is the door to be?
-
Is there an
additional entrance to the garage?
-
What is the
wall the door is to be fixed to made of?
-
Sections
with the windows - yes or no and how are they to be placed?
-
Is the door
to be equipped with photocells?
-
How many
additional transmitters (remote controls) to be delivered?
HANDLOPOL
BR-77w roll-up doors are made for individual orders, to the openings with
maximum dimensions 2600 x 2600 [mm] (width x height). Doors for openings
with larger dimensions can be made only upon the prior agreement.
The following
drawing shows the required mounting dimensions indispensable for the correct
door selection and execution.


Minimum widths
of side space required to fix the door W1 min and W2 min
are given below.
   

Required
minimum garage depth Emin (free space under the ceiling) results from
HANDLOPOL BR-77w door construction and it is Emin = HO
+ 600 mm, with the standard
HANDLOPOL control device rail lengths 2700
[mm]; 3300 mm and 3700 [mm].
If the
garage construction requires joist execution, it should be made in such a
way as to leave the required free space under the ceiling.
For
the correct mounting of the door, a doorhead is required which is
indispensable to mount the guides, minimum doorhead height is Nmin = 200
[mm].
As
a standard, after the door has been fully opened there is one coat section
left, so the driveway height is about 100 [mm],
Fig. 2.
On
request it is available to make the door higher so that the driveway height
be equal to the height of the opening. Then
the
required doorhead height is Nmin = 300 [mm].
If you order the door in higher version, write
"yes" in the order form in the column "full
driveway height", otherwise write "no".
   


AW 77 aluminum
sections are made in standard colours: RAL 5012 (blue); RAL 7040 (grey); RAL
8014 (light brown); RAL 8019 (dark brown); RAL 9010 (white).
Guides may be
painted in any colour from the RAL palette. Give the colour of the door in
your order. As a standard all mentioned sub-assemblies for a given door are
made in the same colour (horizontal guide is made in aluminum colour).
HANDLOPOL
BR-77w garage doors as a standard may be mounted
only in a garage provided with an additional entrance.
At the
individual request it is possible to mount the door in a garage without
additional entrance but this must be always agreed upon with
HANDLOPOL
company. Write "yes" or
"no" on the order form in the column
"is there an additional entrance".
Depending on
the execution
HANDLOPOL BR-77w roller doors may be fixed to the walls made
of reinforced concrete (B), brick walls
(C) or walls made of steel frames
(S). In the order give the exact data of
wall execution as well as the wall thickness. The room dedicated to the
mounting has to be completely finished (walls plastered, floor finished),
the walls cannot have the traces of defects of execution. The room has to be
dry and free from chemicals harmful for paint coats. Too much dampness in
the object may have a negative impact on the door operation and its
durability, and even lead to the door damage.
Sections in
glazed version may be used in doors type
HANDLOPOL BR-77w in order to light
better the room. These sections are not provided
with heat insulation. Examples of placing sections with windows are
given in the following figures.
  Maximum
6 sections may be used in the door coat in glazed version. It is permissible
to use maximum three sections one after another. State the number of glazed
sections in the order and show in the enclosed drawing at what height they
are to be fixed in the door coat (example of a drawing illustrating the way
of glazed section location marking is given below),
if you do not wish glazed sections, put sign "-"
in the column.
 

HANDLOPOL
BR-77w roller door as a standard are equipped with a motion work controlled
manually from inside the room and remotely using a transmitter (remote
control). The device may be additionally provided with photocells which make
closing the door unable if there is an obstacle in its clearance and with a
lamp with a bulb 24 V max. 12 W, which will be additionally lighting the
room for about 5 minutes from the moment when the door drive has been put in
motion. In the case of an electric control damage or supply voltage cut-off
there is a possibility to open the door manually from inside the room after
having unlocked the drive.
Specify the
number of additional transmitters (there are two in standard) in the order
and give information if you wish photocells.
State possible
additional requirements concerning the door execution on the order form in
the column "NOTES".
Colours
according to RAL palette
|