| CORIAN® - Care and maintenance guide, color map & Technical specification | |
| General cleaning | |
|
VERY EASY TO MAINTAIN |
 |
|
The easy cleaning of CORIAN® are important for two retasons: firstly - trublee-firee maintenance saves time and money: and secondly - thanks to its composition, CORIAN® esurens optimal hygiene. |
|
| Day-to-day care | |
|
A TOTALLY HYGENIC, NON-POROUS SURFACE |
 |
|
Beacase liquids do not penetrate the CORIAN® surface, dirt cannot accumulate. For best results in daily cleaning, it is recomended to use water - or an ammonia- based surface cleaner to remove spots. For toughter stains abrasive powder (or cream) should be applied with a scouring pad. The surface can then be wiped clean a damp cloth. |
|
| Cuts, scratches, nicks... | |
|
ACCIDENTAL SCRATCHES AND CUTS CAN BE SANDED AWAY IN MINUTES |
 |
|
Deep cuts and scratches should be sanded down with 120 grame sandpaper. Finer sandpapers - 180 to 240 weight - will then remove of damage. Running over CORIAN® with a scouring pad will bring back your surface´s original CORIAN® shine. |
|
| ... and burns | |
|
RESISTENS HIGH TEMPERATURES; ACCIDENTAL BURNS CAN BE SANDED AWAY |
 |
|
CORIAN® withstands high and cold temperatures. Hot pans should not be placed directly on a CORIAN® urface, but if a minshap does occur, the burn mark can easily removed vith light sanding. |
|
| Efficiency | |
|
SPECIAL FEATURES |
 |
|
CORIAN® offers manypracitical details that give users simple and maintenance. These features include: ´backsplashes´protecting the wall behind a kitchen or bathrom sink area; inconspicuous seams between CORIAN® pieces; its solid, non-porous surface; and raised edges to keep liquids from flowing onto the floor. |
|
|
|
|
|
CORIAN® - Colours map |
|
 |
 |
|
|
|||||
| CORIAN® - Technical specification | |||||
| PROPERTY | RESULT | UNITS | TEST METHOD | ||
|
Density: -Genesis/Venaro colours |
1,78 | Gms/cc | DIN 53 479 | ||
| -Sierra/Summit colours | 1,69 | ISO R 1183 | |||
|
Weight per m² |
Genesis/Venaro colours | Sierra/Summit colours | |||
| 6 mm = 11,5 | 6 mm = 10,9 | kg/m² | |||
| 13 mm = 11,5 | 13 mm = 21,8 | kg/m² | |||
| 19 mm = 34,0 | 19 mm = 32,3 | kg/m² | |||
|
Tensile strength |
34,9 - 39,5 | N/mm² | DIN 53 455 ISO/DIS 527-78 | ||
|
Elesticity modulus |
10.000 ± 400 | N/mm² | DIN 53 457-Z-B 3 ISO/DIS 527-78 | ||
|
Percentage elongation at break |
0,36 - 0,49 | % | DIN 53 455 ISO/DIS 527-78 | ||
| Flexural strength | 6 mm = 11,5 | N/mm² | DIN 53 452 | ||
| 13 mm = 11,5 | N/mm² | ||||
| ISO 178-75 | |||||
| 19 mm = 34,0 | N/mm² | ||||
| Ball indenation hardnes | 337,3 ± 8,4 | N/mm² | DIN 53 456 ISO/DIS 2039 | ||
| Inpact behavior test 500 g weight. | 6 mm = 11,5 | cm | DIN 53 443 BL 1 | ||
| 13 mm = 11,5 | cm | ||||
| Damaging height W 50 | |||||
| 19 mm = 34,0 | cm | ||||
| Cofficient of logutudinal expansion | max. 30,5 x 10-6 K | , | DIN 51 045 | ||
| Thermal conductvity | 10.tr = 0,769 | W/(mK) | DIN 52 612 | ||
| Dielectric strength | median value 32 | kV/mm | DIN 53 481 IEC243 | ||
| Electrical final charge/half-life time | Eg Polyacryl - 1,3·104 | Vcm-1 | DIN 53 486 | ||
| Eg Polyamide -3,1·103 | Vcm-1 | ||||
| Specific resistance | median value PD=3,114 | Wcm | DIN 53 482 IEC93,2 | ||
| DIN-Safety data | No hazardus preparation | , | DIN 52 900 | ||
| Flame spread: | 6mm* | 13mm | 19mm | ASTM-E-84 | |
| Galnesis/Venaro colours | |||||
| smoke devloped | 25 (20) | 10 | 15 | ||
| flame-spread | 25 (15) | 5 | 6 | ||
| class rating | 1 | 1 | 1 | ||
| Sierra/Summit colours | |||||
| flame-spread | 20 | 15 | 15 | ||
| smoke devloped | 5 | 25 | 30 | ||
| class rating | 1 | 1 | 1 | ||
| Smoke toxicity | Clas fo | NF F 16-276 | |||
| Combustion heat | 9,29 J/kg | Oxigen bomb calorimeter | |||
| Food contact | Listed for food zones | NSF standard 51 | |||
| Colour fastness | Without change | NEMA LDI-2-06 | |||
| Light fastness | Better than 7 | DIN 53 389 | |||
| Weathering resistance | No change after 1000 hrs | ASTM-D-1499 | |||
| Resistance to food stains | Physiologically appropriate | § 31 paragraph 1 food and commo- dity goods law | |||
| Contamination by | 0 | ISO 486 A | |||
| mold fungus | 2-3 no change | ISO 486 B | |||
| CORIAn does not bleech, not or oxydise | |||||
| * 6mm CORIAN athered with CORIAN panel adhesive to 12,5 mm gypsum board. Values in () for athered to masonry surface | |||||
|
C O R I A N® |
|||||||
| Kitchen | Bathroom | Marine World | The Colours of C O R I A N® | The Colours pdf | Technical spec. | Use care | Price list |
| Vi söker återförsäljare i Stockholm,
Göteborg, Malmö, Gävle, Sundsvall, Umeå och Norrköping.
Kontakta oss för information HANDLOPOL SVENSKA AB |
| 433 33 Partille, SWEDEN |
| Tfn. +46(0)31- 3363553 |
| fax 031-3363501 |
|
l INDEX l Köksinredningar l Bänkskivor l Ekmöbler l Golvur l Dörrar l Garageportar l Natursten l © 1991-2009.
Dessa sidor tillhör Handlopol Svenska AB.
|